Plasterboard
Features
The PlanoFlex movement joint molding is a problem solver for interior corner formations in interior construction, which already has a movement joint profile integrated in the gypsum board.
The PlanoFlex movement joint molding can be used in all inside corners.
The movement joint molding is used especially at the transition to the roof slope, as the integrated movement joint profile can reduce the risk of cracking due to component movement.
Fields of application
The PlanoFlex movement joint molding is used on all interior corners in interior construction. Thanks to the flexible profile, it is adaptable to all angles.
External wall: internal corner
- Wall - Wall
- Wall - ceiling
- Wooden frame construction, wooden panel, wooden studs: wall constructions: Installation level
- Wooden frame construction, wooden panel,, wooden studs : wall constructions: OSP panels
- Facing shells Wall constructions: Metal substructure or wooden substructure
Component connections or transitions
- At the transition from the roof slope to the wall (jambs/downsides) Roof slope - jambs/downsides
- At the transition from the roof slope to the collar beam
Processing
- Prefabricated with drywall panels of gypsum board, etc.
- Drywall panels in the thickness of 12.5 - 25 mm
- Q3 quality factory-made and immediately ready for painting
- Suitable for installation in wall and ceiling areas as well as in facing shells
- No separate corner profile required
PlanoFlex movement joint molding is easy and quick to process (high time savings).
- No reinforcement strip necessary
- Multiple, time-consuming filling is no longer necessary
- Can accommodate slight unevenness in the construction
- Pre-assembled at the factory for exact, straight edge formation
The PlanoFlex movement joint molding is used on all interior corners in interior construction. Thanks to the flexible profile, it is adaptable to all angles from 1-180°.
Due to component movement, tensile and shear forces occur in all buildings, which can result in visible cracks in the surface at transitions.
- For horizontal inside corners of any kind (1°-180°)
- For vertical inside corners of any kind (1°-180°)
Stresses between components caused by
- For horizontal inside corners of any kind (1°-180°)
- For vertical inside corners of any kind (1°-180°)
often lead to uneven joint cracking. This risk of cracking in this area can be avoided by using our PlanoFlex molded part.
Delivery forms
PlanoFlex movement joint molding gypsum board.
| Item no. | EAN No. | Thickness (mm) | Length (mm) | Unwinding width a (mm) | Unwinding width b (mm) | Edge | Weight (kg per piece) |
|---|---|---|---|---|---|---|---|
|
2111002 |
4260482429416 |
12,5 |
2500 |
145 |
145 |
4 x SK |
8,09 |
|
2111005 |
4260482429423 |
12,5
|
2500 |
195
|
195 |
4 x SK |
10,71 |
Information:
Standard lengths: 2000 mm, 2500 mm, 2750mm.